Menu

Robotics Automation
Training
- - All Classes
  - Robot Programming 1
  - Robot Programming 2
  - ABB RobotStudio 1
  - Machine Vision
  - Full Class Schedule
    - - Due to the uncertainty related to the Coronavirus, all Training Courses hosted by House of Design are temporarily suspended. We hope to begin offering classes again by August, but this too may be subject to change depending on conditions at that time. In the meantime, please contact us to be informed of any future updates and changes.
Products
- - HOUSE OF DESIGN
    AUTOMATED PRODUCTS
  - View All Truss Products
  - Automated Floor Truss System
    - Automated Floor Truss System
      
      The floor truss system allows an operator to manually load members in a sequenced order. The members will either get spliced (if a top or bottom chord) or go directly to the preplate station (if it is a web). Once spliced and preplated with the appropriate nail plate(s), member then travels to the table for automatic layout and assembly. The floor truss system uses two mirrored lines that feed a single assembly table; ejecting two trusses every time the gantry press is operated
  - Automated Roof Truss System
    - Automated Roof Truss System
      
      The floor truss system allows an operator to manually load members in a sequenced order. The members will either get spliced (if a top or bottom chord) or go directly to the preplate station (if it is a web). Once spliced and preplated with the appropriate nail plate(s), member then travels to the table for automatic layout and assembly. The floor truss system uses two mirrored lines that feed a single assembly table; ejecting two trusses every time the gantry press is operated
  - Automated Roof Member Preplate
    - Automated Roof Member Preplate
      
      The roof member preplate system takes pre-cut roof truss members and preplates them in the correct sequence to be assembled on the table. The system will be designed to build trusses using standard construction practices and material.
  - Automated Nail Plate Picker
    - Automated Nail Plate Picker
      
      The automated nail plate picker system is designed to stack nail plates in organized trays that are then loaded into nail plate tray racks. Each tray can have one truss per tray or multiple trusses per tray depending on the configuration of the truss. The tray racks have multiple trays and are delivered to the assembly tables via forklift or other means. The operator loads and unloads each tray from the system. This same operator also keeps the magazines of nail plates full.
  - Automated Chord Preplate
    - Automated Chord Preplate
      
      The Automated Chord Preplate System is actually two systems in one: an automated splicer that splices multiple members into a single chord, and a preplate systems that presses nail plates into the correct locations on the chord. In its combined mode, both the splicer and the preplate system work together to produce a completed spliced and preplated chord. The infeed is manually loaded in a sequential order of members that need to be splicedpreplated. The outfeed has chords that are splicedpreplated together and they are manually unloaded.
  - Automated Splicing System
    - Automated Splicing System
      
      The Automated Splicing system is used to splice multiple members together. The infeed is manually loaded in a sequential order of members that need to be spliced. The outfeed has chords that are spliced together and they are manually unloaded.
  - FlexBagger
    - FlexBagger
      
      Kitting & Bagging with YuMi®
      FlexBagger – THE SOLUTION for all your bagging needs. With Yumi, kitting and bagging has never been easier. No really, we mean it. This system is completely customizable. Imagine the possibilities for your industry or company.
  - Produce Stacker 3500x
    - Produce Stacker 3500x
      
      Fully Automated System
      A universal produce bag stacking system.
      
      Stacking Rate
      Our produce stacker delivers an incredible stacking rate of approx. 58 bags per minute or 3500 bags per hour. This system is highly configurable to fit your individual needs and can be used with either bin boxes or standard boxes.
  - Universal Robotic Cell
    - Universal Robotic Cell
      
      A versatile customizable robot cell by House of Design.
      
      Visit the link to see further details on this system.
  - VersaBuilt
    - VersaBuilt
      
      House of Design and Rekluse Motorsports, in Boise, Idaho, have combined efforts to create a new company, VersaBuilt.
      VersaBuilt was born out of a robotic integration project by House of Design for Rekluse Motorsports. This system was designed to tend a HAAS DT-1 Vertical Machining Center CNC, loading and unloading 5 part families with 2 operation machining.
  - ABB ROBOTS
  - View All
Latest News
Videos
About Us
Contact Us

Forums
Members
Recent Posts

SolidWorks Simulati...

Notifications

Clear all

SolidWorks Simulations

No topics were found here

Share:

Forum Statistics

40 Forums

27 Topics

55 Posts

0 Online

52 Members

Latest Post: What are key differences between the ABB IRB120 and the Universal UR3 for someone looking to start working with collaborative robots? Our newest member: chiquitabruton Recent Posts Unread Posts Tags

Forum Icons: Forum contains no unread posts Forum contains unread posts

Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed

X