Menu

ABB IRB 8700

Pay load: 550-800 kg
Reach: 3.5, 4.2 m
ABB IRB 8700

ABB IRB 8700

High payload robot

The IRB 8700 is ABB’s 8th generation of heavy payload, high performance industrial robots. With a focus on high production capacity, compact design, simple service, and low maintenance cost, the IRB 8700 offers a generalpurpose robot with the handling capacity and sustainability to meet even your heaviest demands.
In designing the IRB 8700, ABB focused on delivering a reliable robot with a low total cost of ownership. Through a combination of robust design elements, including simpler parts configurations where possible, ABB Robotics applied decades of engineering experience to combine the high performance customers require with low overall maintenance needs. In addition, the IRB 8700 delivers 25% faster speeds than any other robot in this class size.

Outstanding reliability
With a straightforward and uncomplicated design that uses world-class components, LeanID for the best cost-to-endurance ratio in a dress pack, and ABB’s Foundry Plus 2 as standard protection, the IRB 8700 will run with very high uptime—a key feature in production lines that operate around the clock.

Simplified design
The IRB 8700 has only one motor and one gear per robot axis, while most other robots in this size class use dual motors and/or gears. In addition, there are no gas springs that can leak and cause safety problems, only a reliable counterweight and mechanical springs for counter balancing. Together these design elements mean fewer components to fail while delivering shorter cycle times and higher accuracy.

Built around LeanID
With LeanID, ABB has developed a concept that is less expensive than completely integrated dress packs but still delivers most of the benefits for a fraction of the cost. LeanID results in a robot that is easy to simulate in offline programming, has a long dress pack lifetime, supports flexible production with a large working range, and can easily enter tight spaces.

Fast
High payload robots are typically known as being very slow, but the IRB 8700 turns these assumptions on their head. With a compact footprint, optimized counterweight, parallel linkages, stiff axes, and fewer drive motors, the IRB 8700 keeps its momentum down and speed up. In fact, all of these improvements add up to a robot that is 25 % faster than any other robot in its size class. In addition, thanks to superior motion control at high moments of inertia (725 kgm2) the robot can adapt, or slow its speed, to accommodate heavy and wide parts.

Sustainable
The IRB 8700 fully complies with environmental directive RoHS 2002/95/EC and Reach No1907/2006 directives for using non-hazardous materials, resulting in a robot that is safer for work environments.

Features and benefits:

  • High payloads up to 1000 kg with the wrist down
  • 25% faster speeds than other robots in this size class
  • Highly reliable with simplified design and Foundry Plus 2 protection standard
  • Built around LeanID for reduced wear on dress packs and ease of simulation
  • Built using non-hazardous materials

Automated Floor Truss System

Automated Floor Truss System

Automated Roof Truss System

Automated Roof Truss System

Automated Roof Member Preplate

Automated Roof Member Preplate

Automated Chord Preplate

Automated Chord Preplate

Automated Nail Plate Picker

Automated Nail Plate Picker

Automated Splicing System

Automated Splicing System

UNIVERSAL ROBOTIC CELL

Universal Robotic Cell

PRODUCE STACKER 3500x

Produce Stacker 3500x

ABB IRB 1100

Pay load: 4 kg
Reach: 1.2, 1.45 m
ABB IRB 1100

ABB IRB 120

Pay load: 3 kg
Reach: 0.58 m
ABB IRB 120

ABB IRB 1200

Pay load: 5, 7 kg
Reach: 0.9, 0.7 m
ABB IRB 1200

ABB IRB 140

Pay load: 5 kg
Reach: 1.44 m
ABB IRB 140

ABB IRB 1410

Pay load: 5 kg
Reach: 1.44 m
ABB IRB 1410

ABB IRB 14000 YuMi®

Pay load: 500 g
Reach: 559 mm
ABB IRB 14000 YuMi®

ABB IRB 14050 Single-arm YuMi®

Pay load: 500 g
Reach: 559 mm
ABB IRB 14050 Single-Arm YuMi®

ABB IRB 1520ID

Pay load: 4 kg
Reach: 1.50 m
ABB IRB 1520ID

ABB IRB 1600

Pay load: 6 kg, 10 kg
Reach: 1.2 m, 1.45 m
ABB IRB 1600

ABB IRB 1660ID

Pay load: 6 kg
Reach: 1.55 m
ABB IRB 1660ID

ABB IRB 2400

Pay load: 12 kg, 20 kg
Reach: 1.55 m
ABB IRB 2400

ABB IRB 2600

Pay load: 12 kg, 20 kg
Reach: 1.65 m, 1.85 m
ABB IRB 2600

ABB IRB 2600ID

Pay load: 8 kg, 15 kg
Reach: 1.85 m, 2.00 m
ABB IRB 2600ID

ABB IRB 360

Pay load: 1 kg, 8 kg
Reach: Ø1.13 m
ABB IRB 360

ABB IRB 390

Pay load: up to 15 kg
Reach: info available soon
ABB IRB 390

ABB IRB 4400

Pay load: 10 kg, 60 kg
Reach: 1.95 m, 2.55 m
ABB IRB 4400

ABB IRB 460

Pay load: 110 kg
Reach: 2.40 m
ABB IRB 460

ABB IRB 4600

Pay load: 20 kg, 40 kg, 45 kg, 60 kg
Reach: 2.05 m, 2.51 m, 2.55 m
ABB IRB 4600

ABB IRB 52

Pay load: 7 kg
Reach: 1.2 m, 1.45 m
ABB IRB 52

ABB IRB 5350

Pay load: 7 kg
Reach: 1.35 m
ABB IRB 5350

ABB IRB 5400

Pay load: 25 kg
Reach: 3.1 m, 15 m
ABB IRB 5400

ABB IRB 5500-22/23 Flexpainter

Pay load: 13 kg
Reach: 2.7 m
ABB IRB 5500-22/23 Flexpainter

ABB IRB 5500-25 Elevated Rail

Pay load: 13 kg
Reach: 2.7 m
ABB IRB 5500-25 Elevated Rail

ABB IRB 5500-27

Pay load on wrist: 13 kg
Wrist work envelope: ±140º
ABB IRB 5500-27

ABB IRB 5510

Pay load on wrist: 13 kg
Wrist work envelope: ±140º
ABB IRB 5510

ABB IRB 660

Pay load: 180 kg, 250 kg
Reach: 3.15 m
ABB IRB 660

ABB IRB 6620

Pay load: 150 kg
Reach: 2.2 m
ABB IRB 6620

ABB IRB 6620LX

Pay load: 150 kg
Reach: 1.9 m
ABB IRB 6620LX

ABB IRB 6640

Pay load: 130 – 235 kg
Reach: 2.55 – 3.2 m
ABB IRB 6640

ABB IRB 6650S

Pay load: 125 kg, 200 kg
Reach: 3.0 m, 3.5 m
ABB IRB 6650S

ABB IRB 6660 for pre machining

Pay load: 205 kg
Reach: 1.9 m
ABB IRB 6660 for pre machining

ABB IRB 6660FX

Pay load: 40 kg
Reach: 3.10 m + 1.40 m
ABB IRB 6660FX

ABB IRB 6700

Pay load: 150 kg, 155 kg, 175 kg, 200 kg, 205 kg, 235 kg, 245 kg, 300 kg
Reach: 2.60 m, 2.65 m, 2.70 m, 2.80 m, 2.85 m, 3.00 m, 3.05 m, 3.20 m
ABB IRB 6700

ABB IRB 6790

Pay load: 205, 235 kg
Reach: 2.65, 2.80 m
ABB IRB 6790

ABB IRB 760

Pay load: 450 kg
Reach: 3.18 m
ABB IRB 760

ABB IRB 7600

Pay load: 150-500 kg
Reach: 3.5, 3.1, 2.8, 2.55, 2.3 m
ABB IRB 7600

ABB IRB 8700

Pay load: 550-800 kg
Reach: 3.5, 4.2 m
ABB IRB 8700

ABB IRB 910INV SCARA

Pay load: 3, 6 kg
Reach: 0.35, 0.55 m
ABB IRB 910INV SCARA

ABB IRB 910SC SCARA

Pay load: 6 kg
Reach: 0.45, 0.55, 0.65 m
ABB IRB 910SC SCARA

RESOURCES

SUPPORT

WHERE TO FIND US

16141 N. 20th Street Nampa, ID 83687

 

 

                        

 

 

SIGNUP FOR OUR NEWSLETTER

 for updates in the Robotics Industry

  OUR PARTNERS

                        

Copyright © 2020 The House of Design. All Rights Reserved

ABB IRB 1600

Pay load: 6 kg;10 kg
Reach: 1.2 m;1.45 m

ABB IRB 1600

The highest performance 10 kg robot.

Performance is often a trade off, optimizing for speed or accuracy. With ABB’s IRB 1600, you don’t have to choose. The robot’s cycle times are shorter, sometimes half that of other robots, allowing you to increase throughput. Meanwhile, you will enjoy the work piece quality that only an ABB robot can offer. Extra everything.

Double your throughput
The IRB 1600 has up to 50 percent shorter cycle times than competing robots in material handling, machine tending and process applications. It speeds up and slows down faster than other robots, saving time while moving between tasks. This is possible due to ABB’s patented second generation QuickMove motion control, combined with the robot’s strong motors and low friction losses in the spur gears.

No more cutting corners
At high speed, most robots will cut corners. With the IRB 1600, the path will be the same regardless of speed, thanks to the robot’s unique combination of brains and brawn. Intelligent second generation TrueMove motion control means that ”what-you-program-is-what-you-get”. Add muscle – a heavy and stiff design – low vibrations and low friction – and you have a robot that will deliver consistently high work piece quality, high yield and few rejects.

Outstanding reliability
The IRB 1600 offers outstanding reliability, even in the toughest environments and the most demanding 24/7 duty cycles. The entire manipulator is IP 54 classed and sensitive parts are IP 67 classed as standard.

The optional protection Foundry Plus offers IP 67, special paint, rust protection and is tailor made for tough foundry environments. The rigid and heavy design combined with spur gears, make the robot extremely robust. Smart collision detection software further adds to the robot’s outstanding reliability.

Easy to integrate
Mounting is fully flexible: on a shelf, on the wall, tilted or inverted. By choosing the compact shortarm version with the 1.2 m reach, you can even fit the IRB 1600 inside a machine, while ensuring sufficient payload as the maximum total load is as high as 36 kg. Sustainable and healthy Low friction spur gears, and no unnecessary moves due to QuickMove and TrueMove, reduces power consumption down to 0.58 kW at max speed, and even less at low speeds. The airborne noise level of just <70 dB (A) secures a healthy sound environment.

Main applications:

  • Assembly
  • Arc Welding
  • Material Handling
  • Machine Tending
  • Material Removal
  • Cleaning/Spraying
  • Dispensing
  • Packing

ABB IRB 120

Pay load: 3 kg
Reach: 0.58 m

ABB IRB 1200

Pay load: 5, 7 kg
Reach: 0.9, 0.7 m

ABB IRB 140

Pay load: 5 kg
Reach: 1.44 m

ABB IRB 14000 YuMi®

Pay load: 500 g
Reach: 500 mm

ABB IRB 1410

Pay load: 5 kg
Reach: 1.44 m

ABB IRB 1520ID

Pay load: 4 kg
Reach: 1.50 m

ABB IRB 7600

Pay load: 150-500 kg
Reach: 3.5, 3.1, 2.8, 2.55, 2.3 m

ABB IRB 8700

Pay load: 550-800 kg
Reach: 3.5, 4.2 m

UNIVERSAL ROBOTIC CELL

VERSABUILT

PRODUCE STACKER 3500x

FLEXBAGGER

RESOURCES

SUPPORT

WHERE TO FIND US

16141 N. 20th Street Nampa, ID 83687

 

 

                        

 

 

SIGNUP FOR OUR NEWSLETTER

 for updates in the Robotics Industry

  OUR PARTNERS

                        

Copyright © 2020 The House of Design. All Rights Reserved