Menu

ABB IRB 5500-22/23 Flexpainter

Pay load: 13 kg
Reach: 2.7 m
ABB IRB 5500-22/23 Flexpainter

ABB IRB 5500-22/23 Flexpainter

A new way of exterior painting.

The IRB 5500 FlexPainter takes painting closer to perfection by integrating the paint application equipment. Combined with its large work area and high acceleration and painting speed, the result is the most efficient and flexible paint robot solution for basically any application.

Paint savings
Our compact and light-weight paint application components enable us to put vital paint regulation equipment, like the pumps, as close as 15 cm from the wrist. This reduces paint and solvent waste during color change significantly.

We have integrated the process equipment in the IRB 5500 FlexPainter in addition to the fully integrated process control (hardware and software). The IRC5P is controlling both the paint process and the robot motion so you can enjoy substantial savings.

Powered by IPS
The “push-out” function integrated in the IPS system is one specific feature that enables a reduction of paint even further. The basic architecture of IPS is built on combining process control and motion control as one, this simplified the system set up and enables for real savings and process perfection.

Built for painting
Standard solutions accommodate color change valves for up to 32* colors with circulation, integrated in the process arm of the robot. Also two pumps, driven by integrated servo motors, 64 pilot valves, atomizer control with dual shape air and closed loop regulation, closed loop regulation of bell speed and high voltage control – all fully integrated. Solutions for both solvent- and water-borne paint are available. Please note that more is avalible on special request.

Less atomizers, higher flow
ABB’s high flow RB1000 atomizer family is specifically designed for the high acceleration and speed of the IRB 5500 FlexPainter. This unique combination significantly reduces the number of robots needed in a spray booth and provides superior performance and high finish quality.

Modular paint components
To integrate the process into the IRB 5500 FlexPainter, ABB has developed a series of light-weight, compact and modular paint application components. This includes color change valves, 2K mixers, air- and paint regulators and pumps. All components are designed for maximum flow.

Paint robot control system
IRC5P is a modern control system, specifically designed for the paint shop. With the IPS (Integrated Process System), the userfriendly Ex certified FlexPaint Pendant and RobView 5 it is a combination of standardized functions for the paint installation and to fit specific needs. This package includes standard applications for defining User screens, Program editing and Version control, and many more. RobView 5 can also be a components in a larger Cell control HMI, like ABB FlexUI or other.

New variants with IRB 5500-22 floor mounted and IRB 5500-23 clean-wall rail
The unique design and configuration of the wall mounted FlexPainter IRB 5500-22 has created the largest and most flexible robot working envelope for any paint robot.

It takes two FlexPainter IRB 5500-22s to handle jobs that up until now have required four paint robots. The results are lower cost, both initially and in the long run, faster installation, high uptime and reliability.

The FlexPainter IRB 5500-22 is specifically designed for ABB’s efficient FlexBell Cartridge System (CBS). The loss during color change is close to zero. It is the best solution for non-batch painting and multiple colors.

Benefits:

  • Faster return on investment
  • Improved reliability of a complete automation system
  • Increased flexibility for new processes and new vehicle models
  • Reduced size and environmetal impact of robotic paint booths
  • Reduced required booth length and width for a robotic paint system
  • Reduced air handling volumes for ventilation
  • Reduced emissions from booth exhausts
  • Reduced machine programming efforts, in time and personnel requirements

Automated Floor Truss System

Automated Floor Truss System

Automated Roof Truss System

Automated Roof Truss System

Automated Roof Member Preplate

Automated Roof Member Preplate

Automated Chord Preplate

Automated Chord Preplate

Automated Nail Plate Picker

Automated Nail Plate Picker

Automated Splicing System

Automated Splicing System

UNIVERSAL ROBOTIC CELL

Universal Robotic Cell

PRODUCE STACKER 3500x

Produce Stacker 3500x

ABB IRB 1100

Pay load: 4 kg
Reach: 1.2, 1.45 m
ABB IRB 1100

ABB IRB 120

Pay load: 3 kg
Reach: 0.58 m
ABB IRB 120

ABB IRB 1200

Pay load: 5, 7 kg
Reach: 0.9, 0.7 m
ABB IRB 1200

ABB IRB 140

Pay load: 5 kg
Reach: 1.44 m
ABB IRB 140

ABB IRB 1410

Pay load: 5 kg
Reach: 1.44 m
ABB IRB 1410

ABB IRB 14000 YuMi®

Pay load: 500 g
Reach: 559 mm
ABB IRB 14000 YuMi®

ABB IRB 14050 Single-arm YuMi®

Pay load: 500 g
Reach: 559 mm
ABB IRB 14050 Single-Arm YuMi®

ABB IRB 1520ID

Pay load: 4 kg
Reach: 1.50 m
ABB IRB 1520ID

ABB IRB 1600

Pay load: 6 kg, 10 kg
Reach: 1.2 m, 1.45 m
ABB IRB 1600

ABB IRB 1660ID

Pay load: 6 kg
Reach: 1.55 m
ABB IRB 1660ID

ABB IRB 2400

Pay load: 12 kg, 20 kg
Reach: 1.55 m
ABB IRB 2400

ABB IRB 2600

Pay load: 12 kg, 20 kg
Reach: 1.65 m, 1.85 m
ABB IRB 2600

ABB IRB 2600ID

Pay load: 8 kg, 15 kg
Reach: 1.85 m, 2.00 m
ABB IRB 2600ID

ABB IRB 360

Pay load: 1 kg, 8 kg
Reach: Ø1.13 m
ABB IRB 360

ABB IRB 390

Pay load: up to 15 kg
Reach: info available soon
ABB IRB 390

ABB IRB 4400

Pay load: 10 kg, 60 kg
Reach: 1.95 m, 2.55 m
ABB IRB 4400

ABB IRB 460

Pay load: 110 kg
Reach: 2.40 m
ABB IRB 460

ABB IRB 4600

Pay load: 20 kg, 40 kg, 45 kg, 60 kg
Reach: 2.05 m, 2.51 m, 2.55 m
ABB IRB 4600

ABB IRB 52

Pay load: 7 kg
Reach: 1.2 m, 1.45 m
ABB IRB 52

ABB IRB 5350

Pay load: 7 kg
Reach: 1.35 m
ABB IRB 5350

ABB IRB 5400

Pay load: 25 kg
Reach: 3.1 m, 15 m
ABB IRB 5400

ABB IRB 5500-22/23 Flexpainter

Pay load: 13 kg
Reach: 2.7 m
ABB IRB 5500-22/23 Flexpainter

ABB IRB 5500-25 Elevated Rail

Pay load: 13 kg
Reach: 2.7 m
ABB IRB 5500-25 Elevated Rail

ABB IRB 5500-27

Pay load on wrist: 13 kg
Wrist work envelope: ±140º
ABB IRB 5500-27

ABB IRB 5510

Pay load on wrist: 13 kg
Wrist work envelope: ±140º
ABB IRB 5510

ABB IRB 660

Pay load: 180 kg, 250 kg
Reach: 3.15 m
ABB IRB 660

ABB IRB 6620

Pay load: 150 kg
Reach: 2.2 m
ABB IRB 6620

ABB IRB 6620LX

Pay load: 150 kg
Reach: 1.9 m
ABB IRB 6620LX

ABB IRB 6640

Pay load: 130 – 235 kg
Reach: 2.55 – 3.2 m
ABB IRB 6640

ABB IRB 6650S

Pay load: 125 kg, 200 kg
Reach: 3.0 m, 3.5 m
ABB IRB 6650S

ABB IRB 6660 for pre machining

Pay load: 205 kg
Reach: 1.9 m
ABB IRB 6660 for pre machining

ABB IRB 6660FX

Pay load: 40 kg
Reach: 3.10 m + 1.40 m
ABB IRB 6660FX

ABB IRB 6700

Pay load: 150 kg, 155 kg, 175 kg, 200 kg, 205 kg, 235 kg, 245 kg, 300 kg
Reach: 2.60 m, 2.65 m, 2.70 m, 2.80 m, 2.85 m, 3.00 m, 3.05 m, 3.20 m
ABB IRB 6700

ABB IRB 6790

Pay load: 205, 235 kg
Reach: 2.65, 2.80 m
ABB IRB 6790

ABB IRB 760

Pay load: 450 kg
Reach: 3.18 m
ABB IRB 760

ABB IRB 7600

Pay load: 150-500 kg
Reach: 3.5, 3.1, 2.8, 2.55, 2.3 m
ABB IRB 7600

ABB IRB 8700

Pay load: 550-800 kg
Reach: 3.5, 4.2 m
ABB IRB 8700

ABB IRB 910INV SCARA

Pay load: 3, 6 kg
Reach: 0.35, 0.55 m
ABB IRB 910INV SCARA

ABB IRB 910SC SCARA

Pay load: 6 kg
Reach: 0.45, 0.55, 0.65 m
ABB IRB 910SC SCARA

RESOURCES

SUPPORT

WHERE TO FIND US

16141 N. 20th Street Nampa, ID 83687

 

 

                        

 

 

SIGNUP FOR OUR NEWSLETTER

 for updates in the Robotics Industry

  OUR PARTNERS

                        

Copyright © 2020 The House of Design. All Rights Reserved

X